User instructions
16
CHANGING
A
PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “
I
NTERRUPTION A PROGRAM
”);
•
select the new program;
•
start the program (see “
S
TARTING THE PROGRAM
”).
ANNULLING A PROGRAM
To annul the program
•
press
the
START/PAUSE
button
(3 )
for a few seconds; the light of
the phase in progress remains on and the light of the program in
progress flashes (confirmation beep);
•
Keep
the
START/PAUSE
button
(3)
pressed until the
PROGRAM
PHASES
lights (5) go out (confirmation beep). “
P0
” will appear on
the
DISPLAY
and pump-out of the water in the tank will begin,
ending the program at the point where it was interrupted. When the
operation is complete, the
PHASES/PROGRAM LIGHTS (5)
flash.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted. When the operation is complete, the
PROGRAM PHASES
lights
(5)
flash.
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph “
S
TARTING THE PROGRAM
”. The program will resume from the
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 60 seconds later.
Содержание DC136LW
Страница 1: ...INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS ...
Страница 2: ......
