User instructions
17
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
•
It is not possible
to select any options when the
soak
program
is being used.
•
All
options
except "Flexi Tabs"
are
disabled
at the end of the
wash cycle. To
disable the “Flexi Tabs” option, press
the
relative button (the light goes out).
•
All options, including
"Flexi Tabs"
are
disabled when a
program is
CANCELLED
after it has begun.
"Flexi Tabs"
The option is optimised for use of detergents which are complete with
salt and rinse aid. With this option activated, any salt and rinse aid If you
wish to use detergents which already contain salt and rinse aid already
in the dishwasher will not be used.
- N.B.:
even with the "
Flexi Tabs"
option selected, the
regenerating salt/rinse aid lights will still stay on if their
containers are empty.
IMPORTANT:
when no longer required, the option must be
disabled
by
pressing the relative
button
(the light goes out).
If the water hardness has been set on a value above H3, and the “Flexi
Tabs” option is activated, the relative light flashes, warning of a setting
error. Integrated products are not suitable for use with very "hard" water;
this does not prevent the use of the option, but the washing results
might not be of the best.
HYCLEAN
Increases the temperature of the final hot rinse to 70°C to ensure a further
reduction in the bacteria level. If the temperature in the tank falls during
this stage of the program (e.g. because the door is opened or due to a
power blackout), the light of the option and the program lights flash to warn
that the additional washing phase has not been completed successfully.
This does not mean that the wash program has been less effective than
usual.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
