Smeg CWC620D, Руководство пользователя

Страница: 34 / 35

‐ CW 620/630
34
13 MALFUNCTIONS SHOWN ON THE DISPLAY (FOR
THE USER)
The dishwasher is able to identify a number of malfunctions and show them on the display.
If the problem persists after the dishwasher has been switched off and back on, proceed as described
below:
(TO ALLOW THE AFTER ‐ SALES SERVICE TO TAKE THE APPROPRIATE ACTION, ALWAYS MAKE A NOTE OF
THE ERROR INDICATED)
Err01
The anti ‐ flooding system has been
activated (for the relevant models
only).
Contact the After ‐ Sales Service.
Err04 Tank temperature probe malfunction Contact the After ‐ Sales Service
Err05 Tank water filling malfunction
Check that the water intake tap is on and the
dynamic pressure in intake system, inspect water
intake filter and clean if necessary. If the problem
persists, contact the After ‐ Sales Service.
Err06
Water pump ‐ out malfunction
(dishwasher is left full of water)
Inspect the filters for dirt and check that the drain
hose is not blocked, bent or crushed.
If the problem persists, contact the After ‐ Sales
Service.
Err09 Tank water level too high Contact the After ‐ Sales Service.
Err23
Boiler heating malfunction (does not
heat up)
Contact the After ‐ Sales Service.
Err24 Boiler temperature probe malfunction Contact the After ‐ Sales Service.
Err25 Boiler water filling malfunction
Check that the water intake tap is on and the
dynamic pressure in intake system, inspect water
intake filter and clean if necessary. If the problem
persists, contact the After ‐ Sales Service.
Err26 Boiler emptying malfunction
Check that the rinsing spray arm nozzles are not
fouled
If the problem persists, contact the After ‐ Sales
Service.
Err27
Boiler emptying malfunction – with tank
full
Contact the After ‐ Sales Service.
Err28
Boiler heating malfunction
(overheating)
Contact the After ‐ Sales Service.