Smeg CW520, Руководство пользователя

Страница: 34 / 37

‐ CW 520/530
34
Limescale in boiler
ensure that the softener is working
properly (if installed).
‐ Check that the filter of the hose
inserted in the rinse aid tank is not
fouled.
INADEQUATE RINSING
Rinse aid unsuitable or not
being delivered correctly.
Rinsing temperature too low
Check container of rinse aid and
whether it is suitable for the type
of mains water.
Check boiler temperature setting
If the problem persists, contact the
after ‐ sales service.
DISHES NOT PROPERLY DRIED
Rinse aid unsuitable or not
being delivered correctly.
Water hardness above 12°dF
or large amounts of dissolved
salts
Check container of rinse aid and
whether it is suitable for the type
of mains water. Restore T Stop ON
and/or connect the appliance to a
hot water supply.
If the problem persists, contact the
after ‐ sales service.
STAINS ON GLASSES AND
CUTLERY
Drain hose incorrectly
positioned or partially
obstructed.
Check that the dishwasher drain
hose and rain are unobstructed
and the drain is not too high up;
see connection diagram.
WATER IN TANK AFTER PUMP ‐
OUT
Drain hose incorrectly
positioned or partially
obstructed.
Check that the dishwasher hose
and drain are unobstructed and
the drain is not too high up; see
connection diagram.
13
MALFUNCTIONS SHOWN ON THE DISPLAY (FOR
THE USER)
The dishwasher is able to identify a number of malfunctions and show them on the display.
If the problem persists after the dishwasher has been switched off and back on, proceed as described
below:
(TO ALLOW THE AFTER ‐ SALES SERVICE TO TAKE THE APPROPRIATE ACTION, ALWAYS MAKE A NOTE OF
THE ERROR INDICATED)
Err01
The anti ‐ flooding system has been
activated (for the relevant models
only).
Contact the After ‐ Sales Service.
Err04 Tank temperature probe malfunction Contact the After ‐ Sales Service
Err05 Tank water filling malfunction
Check that the water intake tap is on and the
dynamic pressure in intake system, inspect water