Smeg CW-511 MDA, Руководство пользователя

Страница: 15 / 30

CW/CWH – 511 MDA
15
5.4 Modifiable parameters
This table lists the model choice or cycle and temperature option parameters.
F/M ID Description Default Notes
M P0 Appliance Type 05 Construction version
Do not modify
F P1 Appliance Model 05 Do not modify
M P2 Boiler temperature 80 Step 1 degree
WARNING: The actual boiler temperature
depends on whether the connection is single ‐
phase or three ‐ phase.
With three ‐ phase connection, do not set more
than 85°
M P3 Tank temperature 58 Step 1 degree
M P4 Thermostop option 01 0=off 1=on
M P5 Soft Start option 01 0=off 1=on Do not modify
M P6 Boiler temperature
offset
00 Real=measured + Offset
M P7 Tank temperature
offset
04 Real=measured + Offset
M P8 Real temperature
display
01 0= filtered, 1= real
F P9 Tank probe type 01 Do not modify
Note for P6 and P7: negative numbers are indicated by illumination of both decimal points (e.g.: ‐ 12

“1.2.”)
5.5 Alarm trigger time thresholds
This table lists all the safety device trigger time thresholds.
F/M ID Description Default Min Max Notes
F A0
F A1 Boiler max. heating time 20 min 5 60 Step = 1 min
F A2 Tank max. heating time 60 min 5 60 Not active with PL ON
F A3 Maximum water intake time 5 min 1 20 Step = 1 min
F A4 Maximum emptying wait time 1 min 1 2 Step = 1 min