Use
27
EN
Setting the time
On the first use, or after a power failure, the
digits
will be flashing on the
appliance’s display.
1. Hold down the clock key
for two
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set using the value
increase
or value decrease
key. Hold down the key to increase or
decrease rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The
symbol on the display indicates
that the appliance is ready to start
cooking.
Timed cooking
1. Keep the clock key
pressed until the
symbol appears.
2. Press the clock key
again. The
symbol and
will appear on
the display alternating with the current
time.
3. Use the value increase
and value
decrease
keys to set the required
minutes of cooking.
4. Select a cooking function and
temperature.
5. Wait approx. 5 seconds without pressing
any key in order for the function to
activate. The current time and the
and
symbols will appear on the
display.
At the end of cooking the heating elements
will be deactivated. On the display, the
symbol turns off, the
symbol
flashes and the buzzer sounds.
6. To turn off the buzzer just press any key
of the programmer clock.
If the time is not set, the oven will
not switch on.
To change the time, hold down the
value increase
key and value
decrease
key at the same time
for two seconds, then set the time.
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
