10
Instructions for the user
4.1
Description of the controls on the front panel
4.1.1 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between
50°
and
280°C
.
When the knob is turned, the light starts flashing to signal the oven is preheating.
When the selected temperature is reached, a sound signal will sound and the light
will stop flashing and remain lit. If the temperature changes, the light starts flashing
again.
In pyrolitic models, the light switches on when the automatic cleaning cycle
(pyrolysis) starts and remains lit until the cycle is complete.
4.1.2 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on the cooking functions, see:
“8. COOKING WITH THE OVEN”.
4.1.3 Programming clock
The programming clock can be used to display the current time or to set a timer or a
programmed cooking operation.
The timer does not stop the cooking operation. It only warns the user that the preset number of minutes
have passed.
4.1.4 Cooking zone control knob
Using these knobs you can control the cooking zones of the induction hob. The hot
plate controlled is indicated above every knob. Turn the knob to the right to adjust
the operating power of the hot plate that goes from a minimum of 1 to a maximum of
9. The operating power is indicated on a display positioned on the hob (The
adjacent symbol indicates the front left cooking zone).
