7 / EN
Instructions
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
•
The door contact surfaces (the front of the cavity and the inside
part of the doors) must be kept very clean in order to ensure the
oven functions correctly.
•
Please follow the instructions regarding cleaning in the section
"Oven Cleaning and Maintenance".
REPAIRS
•
WARNING:
Before maintenance cut the power supply.
•
WARNING:
Only a competent person can carry out any service
or repair operation that involves the removal of a cover which
•
gives protection against exposure to microwave energy.
•
WARNING:
If the door or door seals are damaged, the appliance
must not be operated until it has been repaired by a competent
person.
•
If the power cable is damaged it should be substituted by the
manufacturer, authorized agents or technicians qualified for this
task in order to avoid dangerous situations. Furthermore, special
tools are required for this task.
•
Repair and maintenance work, especially of current carrying
parts, can only be carried out by technicians authorized by the
manufacturer.
Avoid damaging the oven or other dangerous situations by
following these instructions
:
•
Do not switch on the oven without the turntable support, the
turntable ring and the respective plate being in place.
•
Never switch on the microwave when it is empty. If there is no
food inside there may be an electrical overcharge and the oven
could be damaged.
RISK OF DAMAGE!
•
For carrying out oven programming tests put a glass of water
inside the oven. The water will absorb the microwaves and the
oven will not be damaged.
