16
16 / EN
3.4. First use
1. Remove any protective film from the outside
or inside of the appliance, including
accessories.
2. Remove any labels (apart from the rating
plate) from the accessories and from the
oven cavity.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
Maintenance).
4. Heat the empty oven at maximum
temperature (using traditional functions) so
as to remove any manufacturing residues.
For the first heating use a traditional
function and not a microwave function.
3.5. Using the oven
Operating modes
Stand-by:
When no function is selected, the
display shows the current time.
ON:
When any function starts the display shows
the current settings such as the current time, the
duration and the microwave power.
Setting the time
On the first use,or after a power failure
will
be flashing on the appliance’s display. To be able
to start any cooking function, the current time must
be set.
1. Press the
CLOCK
key (6) until the hour
numbers start to flash.
2. Enter the time value by
pressing “
–
” or “
+
” keys
(8/9).
3. Press the
CLOCK
key (6) again to set the
minutes.
4.
Enter the minute’s value by pressing “
–
” or “
+
”
keys (8/9).
5. To finish, press the
CLOCK
key (6) again.
It is not possible to change the time if
the oven is
ON
.
Safety Block
It is possible to block functioning of the appliance
(for example, to prevent it being used by children);
to do so:
1. Press the
STOP / SAFETY BLOCK KEY
(7) for
3 seconds. The microwave will beep and the
appliance will be locked. The screen will display
four lines and oven operation will be blocked.
2. The Clock will continue to be displayed and the
Safety block indicator will illuminate on the
DISPLAY
(1).
3. In order to unlock the microwave, press the
STOP / SAFETY BLOCK KEY
(7) for 3
seconds. The microwave will beep and the
screen will display the clock again.
Use
