Instructions for the user
32
5.3
Editing / saving a program
The oven has 39 programs that can be modified by the user (from
P01
to
P39
).
To set the operating parameters of a program:
1
Turn the knob to the
or
symbol to select the program you wish to
save/edit.
2
Keep the “
PUSH
” knob pressed for 3 seconds: the display will show the
cooking temperature.
3
Turn the knob to the
or
symbol to set the cooking temperature.
4
Press the “
PUSH
” knob: the display will show the cooking time.
5
Turn the knob to the
or
symbol to set the cooking duration time (from
1 to 99 min or INF infinite).
6
Press the “
PUSH
” knob to exit from the data setting and saving phase. The
message “
PEnd
” will appear on the display and the parameters will be
saved.
7
After 3 seconds the display will show the parameters set in rotation.
8
To return to the “
OFF
” status keep the “
STOP
” button pressed for 4 seconds.
5.4
Running a program
From the “
OFF
” status proceed as follows:
1
Turn the knob to the
or
symbol to select one of the available programs
from
P01
to
P39
. The display will show the parameters of the selected
program in rotation.
2
To start the program press the “
START
” button. The appliance will perform a
preheating cycle, showing the text “
PrEh
” on the display.
3
When preheating is finished, a series of buzzers lasting 3 seconds will
indicate that it is possible to proceed with the cooking operation. The text
“
PrEh
” will flash on the display.
4
To start cooking, keep the “
START
” button pressed for 2 seconds. The
display will show the set parameters in sequence, the time remaining until
the end of cooking and the program selected.
5
It is possible to start cooking early before the preheating temperature is
reached, by keeping the “
START
” button pressed for 3 seconds.
6
During the last minute of cooking, only the countdown of the remaining 60
seconds will be displayed. At the end, a buzzer will sound and the flashing
“
End
” text (for 20 minutes) will indicate that cooking has been completed.
7
To return to the “
OFF
” status keep the “
STOP
” button pressed for 4 seconds.
