Instructions for the User
11.2.4
The burner caps, flame diffuser rings and burners
The burner caps and flame diffuser rings can be
removed for easier cleaning; wash them in hot water
and non-abrasive detergent, taking care to remove
all deposits, and wait for them to
dry completely.
Replace the burner caps on their rings, making sure
that the holes
A
are perfectly centered with the
circular projections
B
on the burners.
Never wash these components in the dishwasher.
11.2.5
The plugs and thermocouples
For best performance, the ignition plugs and thermocouples
must always be kept thoroughly clean. Check them
frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a
needle.
11.3
Cleaning the ovens (without self-cleaning liners)
To keep the ovens in good condition, they must be cleaned regularly,
after allowing them to cool down. Remove all removable parts.
In the main oven, remove the side runners by unscrewing the ring-nut
"A"
and extract them from the guide
"B"
. (Fig. 1)
In the auxiliary oven, remove the side runners by lifting them at the front
and extracting them from the hole at the back. (Fig. 2)
•
Clean the oven shelves and side runners with hot water and non-
abrasive detergents, rinse and dry.
•
Clean the inside walls of the oven with a soft cloth dipped in an
ammonium solution, rinse and dry. If stains or drippings remain,
place a damp cloth soaked in ammonium on the bottom of the oven,
close the door and after a few hours wash the oven with hot water
and liquid detergent, rinse and dry.
75
