Smeg A4BL-81 Скачать руководство пользователя страница 3

Страница: 3 / 50

Instructions

• If you need to move food or at the

end of cooking, open the door
5 cm for a few seconds, let the
steam come out, then open it fully.

• Do not open the storage

compartment (where present)
when the oven is on and still hot.

• The items inside the storage

compartment could be very hot
after using the oven.

• DO NOT USE OR STORE

FLAMMABLE MATERIALS IN
THE STORAGE
COMPARTMENT (IF AVAILABLE)
OR NEAR THE APPLIANCE.

• DO NOT USE AEROSOLS IN

THE VICINITY OF THIS
APPLIANCE WHILST IT IS IN
USE.

• Switch off the appliance after use.
• DO NOT MODIFY THIS

APPLIANCE.

• Before any operation on the

appliance (installation,
maintenance, positioning or
movement) always wear PPM.

• Before performing any operation

on the appliance, switch off the
power supply.

• Have qualified personnel carry out

installation and assistance
interventions according to the
standards in force.

• Do not try to repair the appliance

yourself or without the intervention
of a qualified technician.

• Do not pull the cable to remove

the plug.

• If the power supply cable is

damaged, contact technical
support immediately and they will
replace it.

Risk of damaging the appliance

• Do not use abrasive or corrosive

detergents (e.g. scouring
powders, stain removers and
metallic sponges) on glass parts.

• Use wooden or plastic utensils.
• Racks and trays should be inserted

as far as they will go into the side
guides. The mechanical safety
locks that prevent them from being
removed must face downwards
and towards the back of the oven.

• Do not sit on the appliance.
• Do not use steam jets to clean the

appliance.

• Do not obstruct ventilation

openings and heat dispersal slots.

• Never leave the appliance

unattended during cooking
operations where fats or oils
could overheat and take fire. Be
very careful.

• Never leave objects on the

cooking surface.

Содержание A4BL-81



















































Результаты поиска

Содержание A4BL-81

Отзывы:

Похожие инструкции для A4BL-81

Бренды по названию

Популярные бренды

Smeg A4BL-81, Руководство пользователя

Результаты поиска

Содержание A4BL-81

Отзывы:

Похожие инструкции для A4BL-81

Бренды по названию

Популярные бренды