background image

Use

71

EN

3.2 First use

1. Remove any protective film from the 

outside or inside of the appliance, 
including accessories.

2. Remove any labels (apart from the 

technical data plate) from the 
accessories and from the cooking 
compartments.

3. Remove all the accessories from the 

appliance and clean them (see 4 
Cleaning and maintenance). Heat the 
empty ovens at the maximum 
temperature to burn off any residues left 
by the manufacturing process.

3.3 Using the accessories

Tray rack

The tray rack has to be inserted into the tray. 
In this way fat can be collected separately 
from the food which is being cooked.

Improper use

Risk of damage to surfaces

•  Do not cover the bottom of the oven 

cavity with aluminium or tin foil sheets.

•  If you wish to use greaseproof paper, 

place it so that it will not interfere with the 
hot air circulation inside the oven.

•  Do not place pans or trays directly on 

the bottom of the oven cavity.

•  Do not use the open door to rest pans or 

trays on the internal glass pane.

•  Do not pour water directly onto very hot 

trays.

•  Make sure that the flame-spreader 

crowns are correctly positioned in their 
housings with their respective burner 
caps.

•  Cooking vessels or griddle plates 

should be placed inside the perimeter of 
the hob. 

•  All pans must have smooth, flat bottoms.
•  If any liquid does boil over or spill, 

remove the excess from the hob.

Содержание A4BL-81



















































Отзывы: