BACnet Router Start-up Guide
Page 26 of 27
Appendix B Specifications
FS-ROUTER-BACX
1
Available
Ports
One 6-pin Phoenix connector: RS-485 +/- ground port, power +/- frame ground port
One 3-pin RS-485 Phoenix connector: RS-485 +/- ground port
One Ethernet-10/100 port
Power
Requirements
Input Voltage: 9-30VDC or 12-24VAC
Input Power: Frequency 50/60 Hz.
Power Rating: 2.5 Watts
Current draw @ 12V, 150 mA
Approvals
UL 916 approved
WEEE compliant
RoHS compliant
FCC part 15 compliant
BTL certified - level 12
CE certified
Surge Suppression
EN61000-4-2 ESD EN61000-4-3 EMC EN61000-4-4 EFT
Physical Attributes
2
Dimensions
3
5.05 x 2.91 x 1.6 in. (12.82 x 7.39 x 4.06 cm)
4
Weight
0.4 lbs. (0.2 Kg)
Environment
Operating
Temperature
-40°C to 75°C (-40°F to167°F)
Humidity
5 - 90% RH (non-condensing)
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference
•
This device must accept any interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his expense.
Modifications not expressly approved by FieldServer could void the user's authority to operate the
equipment under FCC rules.
”
1
Specifications subject to change without notice
2
Excluding external power supply
3
Excluding mounting tabs
4
WxDxH
