ZL3-TF2Z370EN
Page 2 of 2
8 Limitations of Use
8.1 Limited warranty and Disclaimer/Compliance Requirements
Refer to Handling Precautions for SMC Products.
Caution
●
Exhaust from Multistage ejector
1) For the silencer exhaust type, make sure that there is no obstruction
around the exhaust port.
2) In the case of port exhaust type, exhaust resistance may be affected
depending on the pipe diameter and length, so make sure that the
back pressure is 1 kPa or less.
3) Do not block the exhaust port.
●
Ejector exhaust noise
When the vacuum ejector generates a vacuum, an intermittent noise
(abnormal noise) may be generated from the exhaust section near the
standard supply pressure where the vacuum pressure peaks, and the
vacuum pressure may not be constant. There is no problem in use as
long as the vacuum pressure range is sufficient for adsorption, but if you
are concerned about the sound or affect the setting of the pressure
switch, slightly change the supply pressure and reduce the range of the
intermittent sound. Please avoid it.
●
About the breaking flow rate adjusting needle
1) Leakage cannot be reduced to zero when the needle is fully closed.
2) Check that the push lock handle is locked.
3) When unlocking the push lock handle, do not pull it with excessive
force.
4) This release flow adjustment needle does not rotate more than 12
rotations from fully closed. If you try to rotate the needle any further,
it may be damaged.
5) Do not tighten the handle with tools such as pliers.
●
About solenoid valve and pressure switch
For the solenoid valve (JSY3000 series) and pressure switch (ZSE10
series), refer to each instruction manual.
9 Product disposal
This product should not be disposed of as municipal waste. Check your
local regulations and guidelines to dispose this product correctly, in order
to reduce the impact on human health and the environment.
10 Contacts
Refer to www.smcworld.com or www.smc.eu for your local
distributor/importer.
URL :
https:// www.smcworld.com (Global) https:// www.smc.eu (Europe)
SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, Japan
Specifications are subject to change without prior notice from the manufacturer.
© 2021
SMC Corporation All Rights Reserved.
Template DKP50047-F-085M
