-31-
No. ZK2-OM00201
6.3. Replacement Parts
No.
Item
Remarks
6
Valve assembly
-
7
Connector assembly
Connector for solenoid valve 3 wires (For valve type K, R),
2 wires (For valve type J)
8
One-touch fitting assembly
Standard supply (PV) port: ø6, ø1/4
”
9
Sound absorbing material
10 pcs. per set
10
Vacuum port adapter assembly
With One-touch fitting and filter element
(Case material: Polycarbonate)
11
Filter element
Nominal filtration rating: 30
μm, 10 pcs. per set
12
Check valve
For replacement or addition for manifold exhaust
interference prevention (10 pcs. per set)
13
Pressure switch for vacuum assembly
With 2 screws and 1 gasket
14
Lead wire with connector
-
15
Pressure sensor assembly
With 2 screws and 1 gasket
16
High-noise reduction silencer case assembly
With sound absorbing material
(Part number: ZK2-SE4-6-A)
6.4. Replacement Parts for Single Unit/How to Order
(Including single unit for manifold)
(6) Valve assembly
ZK2 - VA A K 5 L - A
[1]
[2]
[3]
[4]
Select the ZK2-VAAK
□LO-A for a pressure switch with energy saving function.
This assembly does not include special cable assembly for a pressure switch with energy saving function.
[1] Applicable system
A
Ejector system
P
Vacuum pump system
[2] Valve type
K
Supply valve: N.C., Release valve: N.C.
R
Supply valve: Self-holding release valve linked,
Release valve: N.C.
J
Supply valve: N.C., Release valve: None
[3] Rated voltage
5
24 VDC
6
12 VDC
[4] Wiring
C
Manifold common wiring
L
Individual wiring, with connector assembly (lead wire length: 300mm)
LO
Individual wiring, without connector assembly connector
