SMCWEB-N2 Wireless N Universal Repeater User Manual
- 77 -
–
Open
: If selected, hosts in the wireless network can pass the
authentication and connect to the wireless network without using a
password. However, the password is required if you want to transmit
data.
–
Shared
keys
: If selected, hosts in the wireless network can pass
authentication only when the correct password is entered. Otherwise,
the hosts cannot connect to the wireless network.
Encryption
Type
: The type of the key to be set. Hexadecimal and ASCII
code are available.
–
Hex
: Valid characters for keys contain 0–9 and A–F.
–
ASCII
: Valid characters for keys contain all characters of the key board.
Encryption Strength
: The encryption strength determines the length of the
key.
–
If
Encryption Strength
is set to
64 bits
, set the key to 10 hexadecimal
digits or 5 ASCII characters.
–
If
Encryption Strength
is set to
128 bits
, set the key to 26 hexadecimal
digits or 13 ASCII characters.
Key 1/2/3/4
: Set the key based on the selected encryption type and
encryption strength.
-
WPA-PSK[TKIP] or WPA2-PSK[TKIP]
WPA-PSK: Preshared key Wi-Fi protection access
WPA2-PSK: Preshared key Wi-Fi protection access version 2
TKIP: Temporal Key Integrity Protocol
Note that the 802.11n mode does not support the TKIP algorithm.
PassPhrase
: Enter 8-63 ASCII characters or 64 hexadecimal digits.
-
WPA-PSK[AES] or WPA2-PSK[AES]
WPA-PSK: Preshared key Wi-Fi protection access.
WPA2-PSK: Preshared key Wi-Fi protection access version 2.
