C
HAPTER
4
| Initial Configuration
Setup Wizard
– 43 –
S
TEP
3 - WAN
S
ETTINGS
- L2TP
Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual
private networks. The service is provided in many European countries.
Figure 21: Wizard Step 3 - WAN Settings - L2TP
The following items are displayed on this page:
◆
Server IP
— Sets the L2TP server IP Address. (Default: l2tp_server)
◆
User Name
— Sets the L2TP user name for the WAN port.
(Default: l2tp_user; Range: 1~32 characters)
◆
Password
— Sets a L2TP password for the WAN port. (Default:
l2tp_password; Range: 1~32 characters)
◆
Verify Password
— Prompts you to re-enter your chosen password.
◆
Address Mode
— Sets a L2TP network mode. (Default: Static)
◆
IP Address
— Sets the static IP address. (Default: 0.0.0.0, available
when L2TP Network Mode is set to static IP.)
◆
Subnet Mask
— Sets the static IP subnet mask. (Default:
255.255.255.0, available when L2TP Network Mode is set to static IP.)
Содержание SMCWBR11S-N
Страница 1: ...BarricadeTM N 150Mbps Wireless N Mini Broadband Router SMCWBR11S N USER GUIDE...
Страница 137: ...SMCWBR11S N...