SMC Networks SMCEZNET-16SW, Руководство пользователя

Страница: 14 / 23

Quick Installation Guide
2
Installing the Switch
Before installing the EZ Switch 10/100, please verify that you have all the items
listed under “Package Contents”. Also be sure you have all the necessary tools and
cabling before installing the switch.
Package Contents
Description of Hardware
The base unit contains 16 10BASE-T / 100BASE-TX ports.
All RJ-45 ports operate at 10 or 100 Mbps, and support auto-negotiation of speed,
duplex mode (i.e., half or full duplex), flow control, and Auto-MDI/MDIX. Note that
when using auto-negotiation, speed, transmission mode, or flow control can be
automatically set if this feature is also supported by the attached device.
The base unit also includes a display panel for system and port indications that
simplify installation and network troubleshooting.
The following figure shows the components of this switch:
• 16-port 10/100Mbps Ethernet Switch
• Four rubber foot pads
• This User’s Manual
• AC power cord • Rack mount bracket kit
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 5
9 13
10
14 11 15 12 16
2 6 3 7 4 8
Link/Act
10/100M
FDX/COL
POWER