Configuring the
Gateway
48
SMCD3GNV Wireless Cable Modem Gateway User Manual
Table 7. Local IP Configuration Menu
Option
Description
IPv4
(for computers that use IPv4 Messaging)
Gateway Address
IPv4 IP address that the Gateway is to use.
Subnet Mask
IPv4 subnet mask that the Gateway is to use.
DHCP Beginning Address
Starting IP address range for the pool of allocated for DHCP IP addresses. The first two fields
match the first two octets in the Gateway’s IP address and cannot be changed. The last two
fields let you enter the final two octets in the starting IP address range.
DHCP Ending Address
Ending IP address range for the pool of allocated for DHCP IP addresses. The first two fields
match the first two octets in the Gateway’s IP address and cannot be changed. The last two
fields let you enter the final two octets in the ending IP address range.
DHCP Lease Time
Amount of time a DHCP network user is allowed connection to the Gateway with their current
dynamic IP address. Default is One Week.
SAVE SETTINGS button
After configuring your IPv4 settings, click this button to save them.
RESTORE DEFAULT SETTINGS
FOR IPV4 button
Resets the Gateway to the factory default IPv4 settings.
IPv6
(for computers that use IPv6 Messaging)
Enable IPv6
Check this box to configure the Gateway to use IPv6 settings.
Gateway Address
IPv6 IP address that the Gateway is to use.
Subnet Mask
IPv6 subnet mask that the Gateway is to use.
DHCP Beginning Address
Starting IP address range for the pool of allocated for DHCP IP addresses. The first two fields
match the first two octets in the Gateway’s IP address and cannot be changed. The last two
fields let you enter the final two octets in the starting IP address range.
DHCP Ending Address
Ending IP address range for the pool of allocated for DHCP IP addresses. The first two fields
match the first two octets in the Gateway’s IP address and cannot be changed. The last two
fields let you enter the final two octets in the ending IP address range.
DHCP Lease Time
Amount of time a DHCP network user is allowed connection to the Gateway with their current
dynamic IP address. Default is One Week.
IPv6 Mode
Select the IPv6 mode that the Gateway is to use. Choices are:
•
link-local only = allows communication among nodes attached to the same link. Packets
are not forwarded outside the site. (
default
)
•
site-local only = allows communication among nodes within a site or organization.
SAVE SETTINGS button
After configuring your IPv6 settings, click this button to save them.
RESTORE DEFAULT SETTINGS
FOR IPV6 button
Resets the Gateway to the factory default IPv6 settings.
Содержание SMCD3GNV
Страница 70: ...Configuring the Gateway 70 SMCD3GNV Wireless Cable Modem Gateway User Manual Figure 39 Add Blocked Domain Menu...
Страница 73: ...Configuring the Gateway 73 SMCD3GNV Wireless Cable Modem Gateway User Manual Figure 40 Add Blocked Keyword Menu...
Страница 80: ...Configuring the Gateway 80 SMCD3GNV Wireless Cable Modem Gateway User Manual Figure 44 Add Blocked Device Menu...
Страница 216: ...20 Mason Irvine CA 92618 U S A http www smc com Document number DORY06172010...