Configuring Your Gateway
62
SMCD3GN-RRR Wireless Cable Modem Gateway User Manual
A
Addddiinngg aa PPoorrtt FFoorrw
waarrddiinngg EEnnttrryy ffoorr aa PPrreeddeeffiinneedd SSeerrvviiccee
Using the following procedure, you can select well-known services and specify the LAN host
IP address(es) that will provide the service to the Internet.
1. In the Port Forwarding menu, click the
Add
button below the
Predefined Service Table
.
The Predefined Service menu appears (see Figure 37).
2. Complete the fields in the Predefined Service menu (see Table 15).
3. Click
Apply
. (Or click
Back
to return to the Port Forwarding menu or
Cancel
to cancel any
selections you made.) If you clicked
Apply
, the predefined service is added to the
Predefined Service Table
.
4. To configure additional predefined services (up to 100, including customer-defined
services), repeat steps 1 through 3.
5. To change the settings for a predefined service, click the radio button to the left of the
service you want to change and click the
Edit
button. When the Predefined Service menu
appears, edit the settings as necessary (see Table 15) and click
Apply
.
6. To delete a predefined service, click the radio button to the left of the service you want to
delete and click the
Delete
button. No precautionary message appears before you delete a
predefined service.
Figure 37. Predefined Service Menu