SMC Networks SMCBR14 WIRED BARRICADE, Руководство пользователя

Страница: 35 / 78

SMCBR14 Cable/DSL Router User Guide
25
¾
Connect & Disconnect - Click the button, you can handle the on-line connection
or disconnection
¾
Dynamic IP & Static IP - Select the type of IP address under your ISP’s
introduction (We select Dynamic IP for example as shown in Figure 4-10).
¾
Server IP Address/Name - Please type the correct Server IP Address/Name which
your ISP provided.
¾ MTU Size (in bytes) - The default value is 1420, which is usually fine. For some
ISPs, you need modify the MTU. This should not be done unless you are sure it is
necessary for your ISP.
)
Note:
Please refer to 3 PPPoE for the explanations of Connect on Demand , Connect
Automatically , Connect Manually .
4.3.3 MAC Clone
Choose menu “ Network
→
MAC Clone ”, you can configure the MAC address of the
WAN on the screen below (shown in Figure 4-11).
Some ISPs require that you register the MAC address of your adapter, which is
connected to your cable, DSL modem or Ethernet during installation. You do not
generally need to change anything here.
Figure 4-11
¾
WAN MAC Address - This field displays the current MAC address of the WAN port,
which is used for the WAN port. If your ISP requires that you register the MAC
address, please enter the correct MAC address into this field. The format for the
MAC address is XX-XX-XX-XX-XX-XX (for example: 00-0A-EB-22-13-52).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the router. If the MAC address is required, you can click the Clone MAC
Address button and this MAC address will fill in the “WAN MAC Address” field.
)
Note:
1) Click Restore Factory MAC to restore the MAC address of WAN port to the
factory default value.