SMC Networks PF2D5 Series, Руководство по эксплуатации

Страница: 16 / 30

-15-
No.PF
※※
-OMG0006-F
■
Wiring

Connections should only be made with the power supply turned off.

Use separate routes for the product wiring and any power or high voltage wiring.
Otherwise, malfunction may result due to noise.

Ensure that the FG terminal is connected to ground when using a commercially available switch-mode
power supply. When a switch-mode power supply is connected to the product, switching noise will be
superimposed and the product specification can no longer be met. This can be prevented by inserting a
noise filter, such as a line noise filter and ferrite core, between the switch-mode power supply and the
product, or by using a series power supply instead of a switch-mode power supply.
●
Lead wire
Colour Content
Black Output for PF2D3

Brown DC(+)
Blue DC(-)
White Analogue output
●
Connecting the wiring
Attaching the sensor connector to the lead wire (When the product connects to the PF2D2

)
Refer to the PF2D2

operation manual for details of the sensor connector pin numbers.

Strip the lead wire as shown. Do not cut the insulator.

Insert the corresponding wire colour into the pin number printed on the sensor connector, to the bottom,
then part A shown should be pressed in by hand to make temporary connection.

Part A should then be pressed in using a suitable tool, such as pliers.

: The connector cannot be re-used once it has been fully crimped.
In cases of connection failure such as incorrect order of wires or incomplete insertion, please use the new connector.