Made to Order Specifications
(Refer to pages 1395 to 1565 for details.)
JIS Symbol
Specification
Intermediate stroke (Using exclusive body)
Long stroke type
Stroke adjusting unit with adjusting bolt
Helical insert thread
Holder mounting bracket
Ι
Holder mounting bracket
ΙΙ
-XB10
-XB11
-XB20
-X168
-X416
-X417
Made to
Order
1106
Series
MY2H/HT
+1.8
0
JIS Symbol
Specifications
16
25 40
Air
Double acting
0.1 to 0.8MPa
1.2MPa
5 to 60
C
Air cushion, Shock absorber
Not required (Non-lube)
M5 x 0.8
Rc 1/8
Bore size (mm)
Unit symbol
Shock absorber
model
Stroke fine adjusting range (mm)
Stroke adjusting range
16
25
40
0 to
5.6
0 to
11.5
0 to
16
Bore size
(mm)
16
25, 40
Standard stroke
(mm)
Maximum manufacturable
stroke (mm)
Rc 1/4
Bore size (mm)
Without stroke adjusting unit
16
25
100 to 1000 mm/s
100 to 1500 mm/s
40
L unit and H unit
Stroke adjusting unit
Model
Max. energy absorption (J)
Stroke absorption (mm)
Max. impact speed (mm/s)
Max. operating frequency (cycle/min)
Spring
force (N)
Operating temperature range (
°
C)
Extended
Compressed
5 to 60
Note 1)
Shock Absorber Specifications
Standard Stroke
Piston Speed
Stroke Adjusting Unit Specifications
Note 1) When exceeding the air cushion stroke ranges on page 1094, the
piston speed
should
be
100 to 200 mm/s.
Note 2) Use at a piston speed within the absorption capacity range. Refer to page 1094.
∗
Bore size (mm)
Fluid
Action
Operating pressure range
Proof pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Port size
RB
2015
58.8
15
1500
25
8.34
20.50
RB
2725
147
25
1500
10
8.83
20.01
RB
0806
2.9
6
1500
80
1.96
4.22
RB
1007
5.9
7
1500
70
4.22
6.86
RB
1412
19.6
12
1500
45
6.86
15.98
MY2H
MY2HT
L
RB0806
RB1007
H
RB1007
RB1412
L
RB1007
RB1412
H
RB1412
RB2015
L
RB1412
RB2015
H
RB2015
RB2725
50, 100, 150, 200, 250, 300,
350, 400, 450, 500, 550, 600
1000
1500
∗
Strokes are manufacturable in 1 mm increments, up to the maximum stroke. However,
add “-XB10” to the end of the part number for non-standard strokes from 51 to 599. Also
when exceeding a 600 mm stroke, specify “-XB11” at the end of the model number.
Refer to the Made to Order Specifications on page 1405.
When exceeding the stroke fine adjusting range: Use the Made to Order
Specifications “-X416” and “-X417”. (Refer to page 1554 for details.)
∗
Fine stroke adjustment range is applicable for one side when mounted on a cylinder.
∗
The shock absorber service life is different from that of the MY2H/HT cylinder depending on
operating conditions. Refer to the Specific Product Precautions for the replacement period.
P1057-P1120-E.qxd 08.10.3 2:27 PM Page 1106
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com