- 25 -
Robot arm end
INSULOK® tie
Hexagon socket head
cap screw (M4x8)
For plugging when INSULOK®
cable tie fixtures are not used
(2)Mounting to the robot arm.
(4) Secure the cable
Cable is secured by the INSULOK® tie and cable tie mount included in the accessories.
* After securing the table, cut off the excessive part of the INSULOK® tie.
(3) Connecting the M8 connector
- Mount the conversion cable to the M8
connector.
- After mounting the conversion cable, connect
the robot arm end connector and conversion
cable connector.
* Do not energize while securing the connector.
* Check that the connector is not loose.
Hexagon socket head
cap screw (M6 x 23)
Max. tightening torque
:
5.2Nm
Positioning pin
M8-Molex Conversion cable
Max. tightening torque
:
1.0Nm
* Either the robot side
connector S1 or S2
can be connected.
Содержание MHM-25D-X7400A-DTP-N
