SMC Networks JXCEH, Руководство по эксплуатации

Страница: 23 / 85

-22-
No. JXC
※
-OMY0008
6. Details of Power Supply Plug
6.1 PWR: Power supply plug specifications
The specifications of the power supply plug supplied with the controller are shown below.
Power supply plug
Pin No. Terminal Function Functional explanation
1
C24V Power supply (+) The positive control power.
2 M24V Motor power (+)
The positive power for the actuator
motor to be supplied via the controller.
3
EMG Stop (+) The positive power for Stop signal
4
0V Common power (-)
The negative common power for M24V,
C24V, EMG and LK RLS.
5 - NC N/A
6 LK RLS Unlocking (+) The positive power for lock release.
∗
Equivalent to Phoenix Contact: DFMC1, 5/3-ST-LR
6.2 Electrical Wiring Specifications
Prepare the electrical wiring according to the following specifications (to be prepared by the user).
Item Specifications
Applicable wire size
Single, stranded wire
→
AWG20 (0.5mm
2
)
∗
The rated temperature of the insulation coating should be 60
o
C or more.
The O.D. should be ø2.5mm or less.
Stripped wire length
Caution
Do not connect multiple wires to one terminal.
After wiring the power supply plug, connect it to PWR power connector of the controller.
∗
Refer to 6.3 Power Supply Plug Wiring (P.23) for wiring.
Controller Power supply plug inserted into CN1
8mm ø2.5mm or less
Power supply plug
To PWR