No.
Warning
1.
The compatibility of pneumatic equipment is the responsibility of the person who designs
the pneumatic system or decides its specifications.
Since the products specified here are used in various operating conditions, their compatibility
for the specific pneumatic system must be based on specifications provided by a person in c
harge of design and specification after analyzing and/or testing to meet your specific requireme
nts. A guarantee of the expected performance and safety is in charge of a person who decide
s the compatibility for the system. System should be constructed by reviewing all specifications
and considering possible failure of machinery according to the latest catalog and material.
2.
Only trained personal should operate pneumatically operated machinery and equipment.
Compressed air can be dangerous if an operator is unfamiliar with it. Assembly, handling
or repair of pneumatic systems should be performed by trained and experienced operators.
3.
Do not service machinery / equipment or attempt to remove component until safety is
confirmed.
A. Inspection and maintenance of machinery / equipment should only be performed after
confirmation of safe locked-out control positions.
B. When equipment is removed, confirm the safety process as mentioned above. Cut supply
pressure for the equipment, turn off the power, and exhaust all residual compressed air in the
system.
C. Before machinery / equipment is restarted, take care safety of surroundings
.
4.
Contact SMC if the product is to be used in any of the following conditions or
environments.
A. Conditions and environments beyond the given specifications, or if product is used outdoors.
B. Installation on equipment in conjunction with atomic energy, railway, aviation, vehicles, medical
equipment, food and beverage, recreation equipment, emergency stop circuits, press applications, or
safety equipment.
C. An application which has the possibility of having negative effects on people or properties, requiring
special safety.
-3-
!
