SMC Networks EZ Connect Powerline SMCHPAV-ETH, Руководство пользователя

Страница: 24 / 26

23
A-2. Push buttons
Please note that push button functions are disabled in standby mode.
※
Security Button Usage:
1. First time to setup your private network:
It is highly recommended to setup a private network with encryption to protect the
network from unauthorized access through the Powerline network. In a private network
each device must use exactly the same private network name to be able to
communicate.
Step 1. Press and hold the device’s “ Security ” button for more than 10 seconds to set
up a random name for the private network. You can release the button when
you see all the device’s LEDs are turned off and on again. The original private
network name (HomePlugAV) is cleared.
Step 2. Repeat step 1 to clear another device’s original private network name setting.
Step 3. Press both devices’ “ Security ” button for 2 seconds. You will see both devices’
“ Power ” LED start blinking. The devices start to communicate and try to setup
their private network name. They will complete the process within 10 seconds.
On both devices’ all LEDs are turned off and on again.
Note: The setup operation timeout is 120 seconds.
Step 4. If the process to setup your private network failed, please repeat step 1 to step 3
again.
2. Add a new device to an existing private network:
Step 1. Press and hold the “ Security ” button of the new device for more than 10
seconds to clear the original private network name setting.
Step 2. Press the new device’s “ Security ” button for 2 seconds. The “Power” LED starts
blinking.
Step 3. Select a random device from the existing private network. Press its “ Security ”
button for 2 seconds. The device’s “Power” LED starts blinking.