-15-
No.EX##-OMN0011-B
2-1-3. Right click the [EtherCAT] file added to [I/O Devices], and select [Append Box].
2-1-4. After clicking the [SMC Corporation] and [EX260 Series SI Unit] files in sequence, select the unit
to be connected, and click the OK button.
∗
: If EX260 Series SI unit is not found in the list, confirm whether the XML file of this unit is in the
[¥TwinCAT¥Io¥EtherCAT] folder, and start up [TwinCAT( System Manager] again
2-1-5. If additional units are to be connected on the network, repeat steps 2-1-3 and 2-1-4.
2-1-6. Apply the power supply to each unit after connecting the unit set above. Then, click [Reload I/O
Devices] to make it on-line.
