SMC Networks EtherPower II 10/100, Руководство пользователя

Страница: 58 / 78

A-6
T
ROUBLESHOOTING
SMC Driver-Related Error Messages
Refer to the driver installation document on the SMC SuperDisk for
your driver. This document describes driver-related error messages.
Card Problems After Adding a Device to Computer
Make sure the SMC network card and the new device have not
been assigned identical addresses or interrupts. If necessary,
reconfigure one of the devices.
Memory-Management Utilities
EMM386 v4.48 or Earlier
If you use EMM386 v4.48 or earlier (provided with DOS v6.21 and
earlier), upgrade to EMM386 v4.49 by obtaining DOS v6.22 or
later, or change memory managers. Otherwise, incompatibilities in
EMM386 may cause your computer to “hang” when a LAN driver
tries to load.
To determine your DOS version, type “VER” and press Enter at
the DOS prompt.
EMM386 and HIGHSCAN Option
An incompatibility exists when using the HIGHSCAN option with
EMM386 and PCI network cards. This incompatibility may cause
your computer to hang or reboot. To resolve it, do not use
HIGHSCAN as an option parameter to EMM386 in the
CONFIG.SYS file.
Also, note that selecting Memmaker’s (DOS v6.21 or v6.22)
Aggressive Memory Scan option causes Memmaker to specify
HIGHSCAN as an option parameter to EMM386. To resolve this
problem, do not select the Aggressive Memory Scan option in
Memmaker.