SMC Networks EtherPower II 10/100, Руководство пользователя

Страница: 20 / 78

1-6
I
NSTALLING THE
N
ETWORK
C
ARD
System Requirements
For Your Network Card
A PC (WOL-enabled for the SMC9432TX/MP, SMC9432FTX-SC,
and SMC9432FTX-ST) and BIOS that support the PCI Local Bus
Specification (v2.0 or later), a bus-mastering PCI slot, and the
appropriate type of cable:
u
10 Mbps operation: UTP Category 3, 4, or 5 cable. For the
SMC9432BTX model, RG-58A/U or RG-58C/U thin coax cable.
u
100 Mbps operation: UTP Category 5 cable. For the
SMC9432FTX-SC, SMC9432VFS, and SMC9432VFL models,
62.5/125 or 50/125 micron multimode fiber cable. For the
SMC9432FTX-ST model, 62.5/125 micron fiber cable.
For more information, refer to the tables in Appendix B.
For EZStart
u
MS-DOS, PC-DOS, or Windows operating system v3.11 or later.
Installing a Flash ROM
The EtherPower II 10/100 network card has an on-board socket for
an optional Flash ROM for remote booting. For information on
installing Flash ROMs, refer to the instructions that come with the
Flash ROM.