SMC Networks ELITEVIEW Скачать руководство пользователя

Страница: 209 / 232

MIB B

ROWSER

I-17

MIB Browser

Cannot create MIB tree window.

Cause: May be out of memory.
Action: Close other windows and create the MIB tree window again

Cannot create new output file.

Cause: The file already exists or the disk is full.
Action: Specify another filename or skip this action.

Cannot create statistics window.

Cause: Cannot create a statistics window.
Action: Close other statistics windows

Cannot create Toolbar.

Cause: Out of memory.
Action: Close other programs and restart the MIB Browser, or continue without using the toolbar.

Cannot load accelerators.

Cause: Out of memory.
Action: Close other programs and restart the MIB Browser, or continue without accelerators.

Cannot open file.

Cause: The file does not exist.
Action: Verify that you have specified the correct path and filename.

Cannot open SNMP session.

Cause: There are too many sessions or a lower layer (SNMPAPI.DLL) crashed.
Action: Close other windows based on SNMPAPI.DLL, or reset the computer and restart Windows.

Cannot read file.

Cause: Cannot read a text file from disk.
Action: Verify that the correct file was specified, or recreate the file.

Cannot write data to output file.

Cause: Disk full.
Action: Free up disk space and try again.

Index variable(%s) listed in the INDEX clause of %s not found in MIB database.

Содержание ELITEVIEW









































































































































































































































Результаты поиска

Содержание ELITEVIEW

Отзывы:

Похожие инструкции для ELITEVIEW

Бренды по названию

Популярные бренды

SMC Networks ELITEVIEW, Руководство по управлению

Результаты поиска

Содержание ELITEVIEW

Отзывы:

Похожие инструкции для ELITEVIEW

Бренды по названию

Популярные бренды