manualshive.com logo in svg

SMC Networks ELITEVIEW, Руководство по управлению

Поделиться
Скачать
SMC Networks ELITEVIEW Скачать руководство пользователя страница 137

RMON U

TILITIES

9-23

Table 9-18  Channel and Buffer Control Table

Field

Description

Owner

The person who created this entry.

Interface

A media interface on the monitored device. (MIB-2: 1.3.6.1.2.1.2.2.1.2)

Data Control

Indicates if the capture channel is enabled or not. The capture channel may be manually enabled or 
disabled using the On/Off button. Or a Turn-On Event defined for this channel can be used to enable 
it. Once enabled, the channel will start capturing packets that pass the filter. 

Accepted/
Captured

Indicates the number of times this channel has accepted a packet, and the number of packets currently 
in this capture buffer.

Buffer Status

Indicates whether the buffer space is available or full (wrapped or locked).

Channel Index

A number that identifies the channel in the channel table. 

Содержание ELITEVIEW









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды