SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2, Руководство пользователя

Страница: 55 / 67

C
HAPTER
6
| Wireless Settings
Wireless Advanced
– 55 –
1.
Click the Enable button to enable this function.
2.
Select the radio button: Deny the stations not specified by any enabled
entries in the list to access for Filtering Rules.
3.
Delete all or disable all entries if there are any entries already.
4.
Click the Add New button and enter the MAC address 00-0A-EB-00-07-
8A /00-0A-EB-00-23-11 in the MAC Address field, then enter wireless
station A/B in the Description field, while select Enabled in the Status
pull-down list. Finally, click the Save and the Back button.
The filtering rules that configured should be similar to the following list:
Figure 41: Filtering Rules
W
IRELESS
A
DVANCED
Choose menu “Wireless->Wireless Advanced”, you can configure the
advanced settings of your wireless network.
Figure 42: Wireless Advanced
◆
Transmit Power - Here you can specify the transmit power of Router.
You can select High, Middle or Low which you would like. High is the
default setting and is recommended.
◆
Beacon Interval - Enter a value between 20-1000 milliseconds for
Beacon Interval here. The beacons are the packets sent by the router
to synchronize a wireless network. Beacon Interval value determines
the time interval of the beacons. The default value is 100.