10
optional connection.)
There is a DIP switch located on the rear panel for setting the
terminating resistor.
You only need to adjust this switch if ther e are two or more external ISDN
equipment attached to the local telephone line.
Setting Up a Windows PC
This section describes the configuration required by LAN -attached PCs
which communicate with the SMC7301TA, either to configure the SMC7301TA,
or for network access. These PCs must have an Ethernet interface installed
properly, be connected to the SMC7301TA either directly or through an
external hub or switch, and have TCP/IP installed and configured to obtain an
IP address through a DHCP server.
Directly connect a Windows 95/98/2000 PC to the SMC7301TA. If TCP/IP
is not already installed, follow the steps below for its installation.
Note:
Any TCP/IP capable workstation can be used to communicate with or
through the SMC7301TA. To configure oth er types of workstations, please
consult the manufacturer’s documentation.
Step 1:
Connect your PC to the SMC7301TA’s LAN port or to a hub/switch
that is connected to the SMC7301TA as depicted above. .
Step 2:
From the Win95/98
Start
Button, select
Settings
, then
Control Panel
.
The Win95/98 Control Panel will display.
Step 3:
Double-click on the
Network
icon.
Содержание BARRICADE SMC7301TA
Страница 1: ...1 BARRICADETM ISDN Router SMC7301TA User s Manual ...
Страница 44: ...44 Step 2 Highlight the entry in the list you want to delete and click Delete ...
Страница 60: ...60 Command ...