Connect all of the computers that you want to have share your
Internet connection. This is necessary to detect that each device
is properly connected. It is safe to connect and disconnect
Ethernet cables from your computer(s), Barricade
TM
g, or
broadband modem when it is turned on.
Use the above diagram when setting up your network.
Note:
Please use standard Category 5 (CAT-5)
Ethernet cables with RJ-45 connectors.
Once you have all of your computers connected, you are ready to
install the EZ 3-Click Installation Wizard.
• Remove the CD-ROM from the box.
• If the computer is off, turn it
on.
• When the computer boots
up, insert the CD-ROM into
the CD-ROM drive of the
computer that is connected
to the Barricade
TM
g router.
Note:
The screen shown to the
right will appear only if
the Autorun feature is
enabled. If the EZ 3-Click
Installation Wizard does
not start automatically, follow the steps below to start the
program:
1. Double-click on [My Computer] icon.
2. Double-click on [CD-ROM] or [Compact Disc] icon to view the
contents of the CD.
3. Click on t
he [EZ Install] icon to launch the program.
Macintosh Users
If you are setting up the Barricade
TM
g Router in an ALL Macintosh
network, please see the manual for specific instructions about
configuring and
setting up the Barricade
TM
g. The EZ 3-Click
Installation Wizard is not compatible with the MacOS.
English
English
7
8
3
Begin
PDA with Wireless
Compact Flash Card
Power
Adapter
Computer
One
Computer
Two
Broadband Modem
(Cable/DSL)
2
Get connected