SMC Networks 8728L2 - annexe 1, Руководство по управлению

Страница: 236 / 546

C
ONFIGURING THE
S
WITCH
3-190
Web – Click Priority, Traffic Classes. Check an interface and click Select to
display the current mapping of CoS values to output queues. Assign
priorities to the traffic classes (i.e., output queues) for the selected
interface, then click Apply.
Figure 3-85. Configuring Ports and Trunks for Class of Service
CLI – The following example shows how to change the CoS assignments
to a one-to-one mapping.
Note: Mapping specific values for CoS priorities is implemented as an
interface configuration command, but any changes will apply to
the all interfaces on the switch.
Console(config)#interface ethernet 1/1 4-144
Console(config)#queue cos-map 0 0 4-234
Console(config)#queue cos-map 1 1
Console(config)#queue cos-map 2 2
Console(config)#exit
Console#show queue cos-map ethernet 1/1
4-236
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
Information of Eth 1/2
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
.
.
.