background image

i

L

IMITED

 W

ARRANTY

Limited Warranty Statement:

 SMC Networks, Inc. (“SMC”) warrants its products to be free 

from defects in workmanship and materials, under normal use and service, for the applicable 
warranty term. All SMC products carry a standard 90-day limited warranty from the date of 
purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace 
any product not operating as warranted with a similar or functionally equivalent product, during 
the applicable warranty term. SMC will endeavor to repair or replace any product returned under 
warranty within 30 days of receipt of the product. 
The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering 
new products within 30 days of purchase from SMC or its Authorized Reseller. Registration can 
be accomplished via the enclosed product registration card or online via the SMC web site. 
Failure to register will not affect the standard limited warranty. The Limited Lifetime warranty 
covers a product during the Life of that Product, which is defined as the period of time during 
which the product is an “Active” SMC product. A product is considered to be “Active” while it is 
listed on the current SMC price list. As new technologies emerge, older technologies become 
obsolete and SMC will, at its discretion, replace an older product in its product line with one that 
incorporates these newer technologies. At that point, the obsolete product is discontinued and is 
no longer an “Active” SMC product. A list of discontinued products with their respective dates 
of discontinuance can be found at:

http://www.smc.com/index.cfm?action=customer_service_warranty

.

All products that are replaced become the property of SMC. Replacement products may be 
either new or reconditioned. Any replaced or repaired product carries either a 30-day limited 
warranty or the remainder of the initial warranty, whichever is longer. SMC is not responsible for 
any custom software or firmware, configuration information, or memory data of Customer 
contained in, stored on, or integrated with any products returned to SMC pursuant to any 
warranty. Products returned to SMC should have any customer-installed accessory or add-on 
components, such as expansion modules, removed prior to returning the product for 
replacement. SMC is not responsible for these items if they are returned with the product.
Customers must contact SMC for a Return Material Authorization number prior to returning 
any product to SMC. Proof of purchase may be required. Any product returned to SMC without 
a valid Return Material Authorization (RMA) number clearly marked on the outside of the 
package will be returned to customer at customer’s expense. For warranty claims within North 
America, please call our toll-free customer support number at (800) 762-4968. Customers are 
responsible for all shipping charges from their facility to SMC. SMC is responsible for return 
shipping charges from SMC to customer.

Содержание 8724M INT - annexe 1




















































































Отзывы: