manualshive.com logo in svg

SMC Networks 8708L2, Руководство по управлению

Поделиться
Скачать
SMC Networks 8708L2 Скачать руководство пользователя страница 578

C

OMMAND

 L

INE

 I

NTERFACE

4-288

ip domain-list

This command defines a list of domain names that can be appended to 
incomplete host names (i.e., host names passed from a client that are not 
formatted with dotted notation). Use the 

no

 form to remove a name from 

this list.

Syntax 

[

no

]

 ip domain-list

 name

name

 - Name of the host. Do not include the initial dot that separates 

the host name from the domain name. (Range: 1-64 characters)

Default Setting 

None

Command Mode 

Global Configuration

Command Usage 

• Domain names are added to the end of the list one at a time. 
• When an incomplete host name is received by the DNS service on this 

switch, it will work through the domain list, appending each domain 
name in the list to the host name, and checking with the specified name 
servers for a match.

• If there is no domain list, the domain name specified with the 

ip 

domain-name

 command is used. If there is a domain list, the default 

domain name is not used.

Содержание 8708L2































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды