manualshive.com logo in svg

SMC Networks 8708L2, Руководство по управлению

Поделиться
Скачать
SMC Networks 8708L2 Скачать руководство пользователя страница 527

VLAN C

OMMANDS

4-237

switchport allowed vlan

This command configures VLAN groups on the selected interface. Use 
the 

no

 form to restore the default.

Syntax 

switchport allowed vlan

 {

add

 

vlan-list

 [

tagged

 | 

untagged

] | 

remove

 

vlan-list

} 

no switchport allowed vlan

•

add

 

vlan-list

 - List of VLAN identifiers to add.

•

remove

 

vlan-list

 - List of VLAN identifiers to remove. 

•

vlan-list

 - Separate nonconsecutive VLAN identifiers with a comma 

and no spaces; use a hyphen to designate a range of IDs. Do not 
enter leading zeros. (Range: 1-4094).

Default Setting 

• All ports are assigned to VLAN 1 by default.
• The default frame type is untagged.

Command Mode 

Interface Configuration (Ethernet Ports 1-8, Port Channel)

Command Usage 

• A port, or a trunk with switchport mode set to 

hybrid

, must be 

assigned to at least one VLAN as untagged.

• If a trunk has switchport mode set to 

trunk

 (i.e., 1Q Trunk), then you 

can only assign an interface to VLAN groups as a tagged member.

• Frames are always tagged within the switch. The tagged/untagged 

parameter used when adding a VLAN to an interface tells the switch 
whether to keep or remove the tag from a frame on egress. 

• If none of the intermediate network devices nor the host at the other 

end of the connection supports VLANs, the interface should be added 
to these VLANs as an untagged member. Otherwise, it is only 
necessary to add at most one VLAN as untagged, and this should 
correspond to the native VLAN for the interface. 

Содержание 8708L2































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды