SMC Networks 8606T Скачать руководство пользователя страница 77

Страница: 77 / 182

ONSOLE

NTERFACE

2-61

2-61.)

SMC TigerSwitch 1000 Local Management -- SMC8606T

< 802.1Q VLAN Static Table Configuration >

                     VID    VLAN Name    Status
                     ------------------------------
                      1                 Active

Egress Ports Forbidden Egress Ports
11111111 00000000

        Untagged Ports
          11111111                        VID : 1
                                          [Show]
                                          [More]
                                          [New]

<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.

Parameter

Description

VID

The ID for the VLAN currently displayed.

Range: 1-2048

VLAN Name

A user-specified symbolic name for this VLAN.

String length: Up to 8 alphanumeric characters

Status

Sets the current editing status for this VLAN as:

Not in Service, Destroy, or Active.

Egress Ports

Set the entry for any port in this field to “1” to add
it to the displayed VLAN, or “0” to remove it from
the VLAN.

Forbidden Egress
Ports

Prevents a port from being automatically added to
this VLAN via GVRP.

Untagged Ports

Set the entry for any port in this field to “1” to add
it to the displayed VLAN as an untagged port.

[Show]

Displays settings for the specified VLAN.

[More]

Displays consecutively numbered VLANs.

Содержание 8606T























































































































































































Результаты поиска

Содержание 8606T

Отзывы:

Похожие инструкции для 8606T

Бренды по названию

Популярные бренды

SMC Networks 8606T, Руководство по управлению

Результаты поиска

Содержание 8606T

Отзывы:

Похожие инструкции для 8606T

Бренды по названию

Популярные бренды