manualshive.com logo in svg

SMC Networks 8150L2, Руководство по установке

Поделиться
Скачать
SMC Networks 8150L2 Скачать руководство пользователя страница 11

vii

Environmental Statement

The manufacturer of this product endeavours to sustain an environmentally-friendly policy 
throughout the entire production process. This is achieved though the following means:

• Adherence to national legislation and regulations on environmental production 

standards.

• Conservation of operational resources.
• Waste reduction and safe disposal of all harmful un-recyclable by-products. 
• Recycling of all reusable waste content.
• Design of products to maximize recyclables at the end of the product’s life span.
• Continual monitoring of safety standards.

End of Product Life Span

This product is manufactured in such a way as to allow for the recovery and disposal of all 
included electrical components once the product has reached the end of its life.

Manufacturing Materials

There are no hazardous nor ozone-depleting materials in this product.

Documentation

All printed documentation for this product uses biodegradable paper that originates from 
sustained and managed forests. The inks used in the printing process are non-toxic.

Purpose

This guide details the hardware features of the switches, including their physical and 
performance-related characteristics, and how to install each switch.

Audience

This guide is for system administrators with a working knowledge of network 
management. You should be familiar with switching and networking concepts.

Related Publications

The following publication gives specific information on how to operate and use the 
management functions of the switches:

The 

Management Guide

Also, as part of both switches’ firmware, there is an online web-based help that describes 
all management related features.

Содержание 8150L2

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды