English
8
English
7
Connecting the Hardware
1
Warning:
Before you begin, turn the power off for all devices.
These include your computer(s), your LAN hub/switch
(if applicable), and the ADSL Barricade
TM
.
Step 1. Connect the ADSL cable
Connect one end of the provided phone cable (RJ-11) to the port
labeled DSL the Rear Panel of the device. Connect the other end
to your wall phone jack.
Note:
ADSL splitters/microfilters are included with some models.
Step 2. Connect the Ethernet cable
If you are connecting a LAN to the ADSL Barricade
TM
, attach one
end of a provided Ethernet cable to a regular hub port and the
other to the Ethernet port on the ADSL Barricade
TM
. If you are
using the ADSL Barricade
TM
with a single computer and no hub,
you must use an Ethernet cable to attach the PC directly to the
device.
Step 3. Attach the power connector
Connect the AC power adapter to the Power connector on
the back of the device and plug in the adapter to a wall outlet
or power strip.
Step 4. Power up your systems
Turn on and boot up your computer(s) and any LAN device such
as hubs or switches.
