English
18
English
17
4. Select your country from the drop down list, then click [Next]
to continue. If your country is not listed, click [Custom] and
skip to section Custom.
5. Select your ISP/Network provider from the drop down list, then
click [Next] to continue. If your ISP/Network Provider is not
listed click [Custom] and skip to section Custom.
6. Enter the username and password supplied by your ISP, then
click [Next] to continue.
Note:
You will only be required to enter a username and password
if your ISP uses protocol PPPoA or PPPoE. If your ISP uses
RFC1483 Bridging no further input is required, simply click
[Next] to continue.
If your ISP uses RFC1483 Routed after clicking [Next] you
will be required to enter the IP address, Netmask, Gateway
address, Primary and Secondary DNS address supplied by
your ISP. Click [Next].
This section provides instructions on how to use the Auto Setup
utility for configuration of the ADSL Barricade
TM
for
your ISP.
1. Insert the Installation utility and Documentation CD
into your CD drive.
2. Browse to the location of your CD drive and run
AutoSetup.exe. This will start the Auto Setup utility, which
provides an easy way to configure the ADSL Barricade
TM
for
your ISP.
3. Click [Yes, I agree] to accept terms of license agreement and
continue with the setup.
Configuring
the ADSL Barricade
TM
3
