Step 6
: Once all the required fields have been filled in, press the [OK] button to
continue. Then check the [Accept to Connect] box.
Step 7
: Scroll down to the section labeled [IP Address Pool]. Change the IP scheme to
match that of the PPTP server's internal network. (i.e. – If the PPTP server's LAN is using
an IP scheme of 192.168.2.xxx, change the IP Pool to be 192.168.2.xxx –
192.168.2.xxx) Also make sure that this range does not conflict with the ranges of other
DHCP servers in the network.
Figure 1.2
Then press the [Apply] button and your settings will be saved.
Figure 1.3
Step 8
: Now click the [Status] link on the left navigation bar and you should see a
[Connect] and [Disconnect] button pertaining to the PPTP Client under the GATEWAY
column.
Содержание 7004FW - annexe 2
