Figure 1.5
Step 7
: You have completed the VPN client setup. Click [Finish] to exit.
Step 8
: Go back into the [Network and Internet Connections] (see Step 2) window and
click the [Network Connections] link.
Figure 1.6
Step 9
: You should now see the new VPN connection that you just created. Double-click
on this connection.
Figure 1.7
Step 10
: Enter the username and password that the Administrator of the remote
network has given you. Verify that the VPN Server field has the correct WAN IP address.
Then press the [Connect] button. (Note: Be sure to enter this correctly as you will NOT
be able to connect without the correct login data)
Once you are connected you should see two new monitor icons in the system tray, and
Содержание 7004FW - annexe 2
