SMC Networks 6608T-INT, Руководство пользователя

Страница: 65 / 113

Port Configuration
1. Highlight “ Port Configuration ” in the Main Menu and press
<ENTER>. This will access the Port Configuration Screen
illustrated below.
Figure 4-6. Port Configuration Screen
2. Highlight the setting under the “ Enabled ” column for the
chosen port and press <ENTER> to use the arrow keys to
toggle between enabling and disabling the port. Press
<ENTER> again to confirm the choice.
3. Highlight the setting under the “ Duplex ” column to adjust
the communication mode for the chosen port. Press
<ENTER> to use the arrow keys to cycle through Full-
duplex, Half-duplex or Auto-Negotiation modes.* Press
<ENTER> again to confirm the choice.
4. Highlight the setting under the “ AgingTime ” column to
adjust Address Aging for the chosen port. Address Aging is
the amount of time addresses will remain in the address
table before being deleted. Press <ENTER> to input a value
between 0 and 43200 seconds. Press <ENTER> again to
confirm the chosen value.
CONFIGURATION AND MANAGEMENT
4-14
Port Configuration
Port Enabled Duplex AgingTime SwitchingMode FlowControl
1 Yes Auto 300 CT Yes
2 Yes Auto 300 CT Yes
3 Yes Auto 300 CT Yes
4 Yes Auto 300 CT Yes
5 Yes Half 300 CT Yes
6 Yes 300 CT Yes
7 Yes Auto 300 CT Yes
8 Yes Auto 300 CT Yes
Return to Previous Menu
Selecting Half or Full Duplex?
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to the Main Menu