Chapter 4 Client PC Configuration
26
2. Select the desired port on a Wireless Print Server, then click
[Next]. A pop-up message will inform you if the port has been
created successfully.
If your Wireless Print Server is not listed:
•
Click the [Refresh] button.
•
Check that both the Wireless Print Server and the printer
are properly connected, and powered on.
•
Check that the Wireless Print Server has been configured.
(Use the Setup Wizard on the CD-ROM.)
If using TCP/IP, try installing the NetBEUI protocol. (See the earlier
section Checking your Network Protocols (Windows 9x) for details.)
Then try again.
Note:
If you see the following error message, either install
Internet Explorer 4 or later, or follow the procedure
in the - Windows Printing Problems section
of Chapter 8.