SMC Networks 2555W-AG2, Руководство пользователя, Страница: 155 / 308

General Commands
7-7
7
The access mode shown in the following tables is indicated by these abbreviations:
Exec (Executive Mode), GC (Global Configuration), IC-E (Interface-Ethernet
Configuration), IC-W (Interface-Wireless Configuration), and IC-W-VAP
(Interface-Wireless VAP Configuration).
General Commands
SNMP Configures community access strings and trap managers 7-39
Flash/File Manages code image or access point configuration files 7-54
RADIUS Configures the RADIUS client used with 802.1X authentication 7-57
802.1X Authentication Configures 802.1X authentication 7-64
MAC Address
Authentication
Configures MAC address authentication 7-69
Filtering Filters communications between wireless clients, controls access to the
management interface from wireless clients, and filters traffic using
specific Ethernet protocol types
7-72
WDS Bridge Configures WDS forwarding table settings 7-76
Spanning Tree Configures spanning tree parameters 7-82
Ethernet Interface Configures connection parameters for the Ethernet interface 7-87
Wireless Interface Configures radio interface settings 7-92
Wireless Security Configures radio interface security and encryption settings 7-112
Rogue AP Detection Configures settings for the detection of rogue access points in the
network
7-112
Link Integrity Configures a link check to a host device on the wired network 7-126
IAPP Enables roaming between multi-vendor access points 7-130
VLANs Configures VLAN membership 7-131
WMM Configures WMM quality of service parameters 7-133
Table 7-3. General Commands
Command Function Mode Page
configure Activates global configuration mode Exec 7-8
end Returns to previous configuration mode GC, IC 7-8
exit Returns to the previous configuration mode, or exits the CLI any 7-8
ping Sends ICMP echo request packets to another node on the
network
Exec 7-9
reset Restarts the system Exec 7-10
show history Shows the command history buffer Exec 7-10
show line Shows the configuration settings for the console port Exec 7-11
Table 7-2. Command Groups
Command Group Description Page