![background image](http://html1.mh-extra.com/html/smc-networks/2555w-ag2/2555w-ag2_user-manual_1301117195.webp)
SNMP Commands
7-47
7
snmp-server targets
This command configures SNMP v3 notification targets. Use the
no
form to delete
an SNMP v3 target.
Syntax
snmp-server targets
<
target-id
> <
ip-addr
> <
sec-name
>
[
version
{
3
}] [
udp-port
{
port-number
}] [
notification-type
{
TRAP
}]
no snmp-server
targets
<
target-id
>
•
target-id
- A user-defined name that identifies a receiver of SNMP
notifications. (Maximum length: 32 characters)
•
ip-addr
- Specifies the IP address of the management station to receive
notifications.
•
sec-name
- The defined SNMP v3 user name that is to receive
notifications.
•
version
- The SNMP version of notifications. Currently only version
3
is
supported in this command.
•
udp-port
- The UDP port that is used on the receiving management station
for notifications.
•
notification-type
- The type of notification that is sent. Currently only
TRAP
is supported.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• The access point supports up to 10 SNMP v3 target IDs.
• The SNMP v3 user name that is specified in the target must first be
configured using the
snmp-server user
command.
Example
Enterprise AP(config)#snmp-server targets mytraps 192.168.1.33 chris
Enterprise AP(config)#
Содержание 2555W-AG2
